Toronto - January 7, 2010 - Adex Mining Inc. ("Adex" or the "Company") (TSX-V: ADE) is pleased to announce its development plans for 2010 at its Mount Pleasant Mine Property ("Mount Pleasant" or the "Property"), located in southwestern New Brunswick Canada. The Property hosts the tungsten-molybdenum bearing Fire Tower Zone ("FTZ") and the tin-indium-zinc bearing North Zone ("NZ"). The FTZ is the site of a past-producing tungsten-molybdenum underground mining operation that was active between 1983 and 1985.

Adex is set to have another busy year in 2010 following the completion of its successful FTZ scoping study in 2008 and its equally successful NZ Preliminary Assessment ("PA") in 2009. The 2008 FTZ scoping study arrived at a pre-tax Internal Rate of Return ("IRR") of 27.1%, while the North Zone PA showed a 28.87% pre-tax IRR for tin concentrate, indium sponge and zinc metal production and a 23.49% IRR for tin concentrate and zinc-indium concentrate production.

The Company recently completed a flow-through financing in excess of $1 million the proceeds of which it intends to use to undertake two separate pilot plant programs: (i) concentrate production by conventional flotation and (ii) metals production using hydrometallurgical processes. Adex has a total of approximately $3 million in cash, including the proceeds of the flow-through financing.

Pilot Programs
The concentrate pilot program is a two stage effort beginning with bench scale work to confirm parameters for producing a marketable indium-bearing zinc concentrate and a saleable tin concentrate and culminating in pilot operations continuously producing both zinc/indium and tin concentrates; the hydrometallurgical pilot program focuses on producing zinc metal and high grade indium sponge from indium bearing zinc concentrate.  The concentrate program will begin in early January and the hydrometallurgical pilot program will begin in early February. Each is scheduled to be completed by mid-summer 2010.

Concentrate and Metal Off-Take Sales Contracts
Adex has commenced negotiation of letters of intent for the sale of its indium sponge and for the sale of its tin concentrate. The successful conclusion of these letters of intent will open the door to the negotiation of sales contracts and will influence the production decision expected by late fall 2010. In addition, details are being finalized on a letter of intent for the sale of Adex’s zinc/indium concentrate, including an appropriate pay factor for indium.

Drilling Program
Adex intends to carry out a 2000 metre, half million dollar drilling program which will focus on upgrading the inferred portion of the NZ resources to the indicated category. The drilling program will result in a revision to the GEMCOM solid model of the NZ and an updated NI 43-101 resource estimation. The drilling program is scheduled to begin in late spring 2010.
 
Definitive Feasibility and Production Decision
A definitive feasibility study is scheduled to commence in mid-summer 2010 and will initially run concurrently with the final stages of the pilot programs. The definitive feasibility study is expected to result in a production decision during the latter half of 2010.

ABOUT ADEX
Adex Mining Inc. is a Canadian junior mining company with an experienced management team. The Company is focused on developing its flagship Mount Pleasant Mine property, a multi-mineral project that is host to promising tungsten-molybdenum and tin-indium-zinc-copper mineralization. Located in Charlotte County, New Brunswick, the Mount Pleasant Mine property is situated approximately 80 kilometres south of Fredericton, the provincial capital, and is 65 kilometres from the United States border. The common shares of Adex trade on the TSX Venture Exchange under the stock symbol "ADE." Technical and business information regarding Adex’s Mount Pleasant property is available on SEDAR at www.sedar.com and the Company’s website at www.adexmining.com.

FOR FURTHER INFORMATION PLEASE CONTACT:
J. Errol Farr CMA
President, Chief Executive Officer and Director
Adex Mining Inc.
1-866-508-2339 (ADEX)
Email: investorrelations@adexmining.com
Website: www.adexmining.com 

No securities commission or regulatory authority has approved or disapproved the contents of this press release.
 
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

FORWARD-LOOKING STATEMENTS
Certain statements in this press release may constitute "forward-looking" statements which involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements of Adex, its subsidiary or the industry in which they operate to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. When used in this press release, the words "estimate", "believe", "anticipate", "intend", "expect", "plan", "may", "should", "will", the negative thereof or other variations thereon or comparable terminology are intended to identify forward-looking statements. Such statements reflect the current expectations of the management of Adex with respect to future events based on currently available information and are subject to risks and uncertainties that could cause actual results, performance or achievements to differ materially from those expressed or implied by those forward-looking statements. These risks and uncertainties are detailed from time to time, including, without limitation, under the heading "Risk Factors", in reports filed by Adex with the Alberta, British Columbia and Ontario Securities Commissions which are available at www.sedar.com and to which readers of this press release are referred for additional information concerning Adex, its prospects and the risks and uncertainties relating to Adex and its prospects. New risk factors may arise from time to time and it is not possible for management to predict all of those risk factors or the extent to which any factor or combination of factors may cause actual results, performance and achievements of Adex to be materially different from those contained in forward-looking statements. Although the forward-looking statements contained in this press release are based upon what management believes to be reasonable assumptions, Adex cannot assure investors that actual results will be consistent with these forward-looking statements. Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.
 
The forward-looking information contained in this press release is current only as of the date of the press release. Adex does not undertake or assume any obligation to release publicly any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.

Toronto – January 12, 2010 – Adex Mining Inc. (“Adex” or the “Company”) (TSX-V: ADE) is pleased to announce it has successfully developed a process for the production of a high purity indium at its Mount Pleasant Mine Property ("Mount Pleasant" or the "Property"), located in southwestern New Brunswick Canada.

Adex overcame a major hurdle at the close of 2009 by producing the first few grams of indium in its bench scale hydrometallurgical process (the “hydromet process”) development program. “I am very optimistic,” stated Errol Farr, Adex President and CEO. “It doesn’t seem like much when you hold it in your hand, but this little nugget sized piece of indium represents the promise of Adex’s success at Mount Pleasant. The potential to produce and direct market a high grade indium product would put Adex in a unique position amongst junior mining companies.”

The bench scale process development work completed to date indicates that the unique hydromet process technology is capable of producing indium in excess of 88% purity. Bench scale optimization of process chemistry to confirm design parameters for the hydromet pilot plant testwork is ongoing.

The hydromet process, developed by Thibault & Associates Inc. of Fredericton, an Adex consultant, involves leaching base metal sulphide concentrate containing approximately 4500 ppm indium and recovering the indium and zinc through a series of solvent extraction and solution purification processes. Adex is considering patent applications with respect to certain aspects of this hydromet process technology.

Indium production potential at Mount Pleasant is about 40 tonnes per year (“tpy”) based on processing 850 tpd of mill feed. Adex is considering two commercial production scenarios for Mount Pleasant. Under the tin concentrate, indium and zinc metal production model, there is also potential to produce about 4,000 tonnes of zinc metal and 3,200 tonnes of tin concentrate per year from the North Zone (“NZ”). Under the tin concentrate and zinc-indium concentrate production model, there is potential to produce about 8,500 tonnes of indium rich zinc concentrate and 3200 tonnes of tin concentrate from the NZ.

With successful scoping/preliminary economic studies behind it as disclosed in the Company’s press release dated January 7, 2010, the Company is now focused on piloting indium-zinc concentrate and tin concentrate production and on piloting its innovative hydromet process to produce indium and zinc metal. Successful pilot test programs will lead to a definitive feasibility study. Positive results from the definitive feasibility study will lead to applications for necessary regulatory approvals and efforts to secure financing to fund engineering, equipment purchase and construction, resulting finally in production.

Adex believes it will be well positioned to begin mine development and process equipment purchase and installation assuming positive results from its definitive feasibility study, government regulatory approvals and project financing by early 2011. Concentrator production is targeted for October/November 2011.

In addition to the tin-indium-zinc-copper bearing NZ, Mount Pleasant hosts the tungsten-molybdenum bearing Fire Tower Zone ("FTZ"). The FTZ is the site of a tungsten-molybdenum underground mining operation that was only in production between 1983 and 1985.

Mineral resources that are not mineral reserves do not have demonstrated economic viability

Dean Thibault, P. Eng., Senior Process Chemical Engineer of Thibault & Associates Inc., a consultant to Adex and an independent qualified person as defined by National Instrument 43-101 (“NI 43-101”) supervised the preparation of the technical information contained in this press release in compliance with NI 43-101.

ABOUT ADEX
Adex Mining Inc. is a Canadian junior mining company with an experienced management team. The Company is focused on developing its flagship Mount Pleasant Mine property, a multi-mineral project that is host to promising tungsten-molybdenum and tin-indium-zinc-copper mineralization. Located in Charlotte County, New Brunswick, the Mount Pleasant Mine property is situated approximately 80 kilometres south of Fredericton, the provincial capital, and is 65 kilometres from the United States border. The common shares of Adex trade on the TSX Venture Exchange under the stock symbol “ADE.” Technical and business information regarding Adex’s Mount Pleasant property is available on SEDAR at www.sedar.com and the Company’s website at www.adexmining.com.

FOR FURTHER INFORMATION PLEASE CONTACT:
J. Errol Farr, CMA
President, Chief Executive Officer and Director
Adex Mining Inc.
1-866-508-2339 (ADEX)
Email: investorrelations@adexmining.com
Website: www.adexmining.com 

No securities commission or regulatory authority has approved or disapproved the contents of this press release.
 
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

FORWARD-LOOKING STATEMENTS
Certain statements in this press release may constitute "forward-looking" statements which involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements of Adex, its subsidiary or the industry in which they operate to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. When used in this press release, the words "estimate", "believe", "anticipate", "intend", "expect", "plan", "may", "should", "will", the negative thereof or other variations thereon or comparable terminology are intended to identify forward-looking statements. Such statements reflect the current expectations of the management of Adex with respect to future events based on currently available information and are subject to risks and uncertainties that could cause actual results, performance or achievements to differ materially from those expressed or implied by those forward-looking statements. These risks and uncertainties are detailed from time to time, including, without limitation, under the heading "Risk Factors", in reports filed by Adex with the Alberta, British Columbia and Ontario Securities Commissions which are available at www.sedar.com and to which readers of this press release are referred for additional information concerning Adex, its prospects and the risks and uncertainties relating to Adex and its prospects. New risk factors may arise from time to time and it is not possible for management to predict all of those risk factors or the extent to which any factor or combination of factors may cause actual results, performance and achievements of Adex to be materially different from those contained in forward-looking statements. Although the forward-looking statements contained in this press release are based upon what management believes to be reasonable assumptions, Adex cannot assure investors that actual results will be consistent with these forward-looking statements. Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.
 
The forward-looking information contained in this press release is current only as of the date of the press release. Adex does not undertake or assume any obligation to release publicly any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.

Toronto – January 26, 2010 - Adex Mining Inc. ("Adex" or the "Company") (TSX-V: ADE) is pleased to announce the filing of a National Instrument 43-101 ("NI 43-101") compliant preliminary assessment report (the "PA") on the North Zone ("NZ") of its wholly-owned Mount Pleasant Mine Property ("Mount Pleasant" or the "Property"), located in southwestern New Brunswick, Canada with the Ontario, British Columbia and Alberta securities commissions.

As reported in a press release issued by Adex on December 9, 2009 (Adex Mining Reports Indium, Zinc and Tin Production Options for Mount Pleasant North Zone), the results of the PA indicate that there are two potentially viable production options for the NZ, including the production of tin concentrate, indium sponge and zinc metal, and the production of tin concentrate and zinc-indium concentrate.  Based on a 10-year projected life for the NZ and production rate of 850 tonnes per day, the PA shows pre-tax internal rates of return (“IRR”) for the tin concentrate, indium sponge and zinc metal production option and the tin concentrate and zinc-indium concentrate production option of 28.87% and 23.49%, respectively.

The press release issued by Adex on December 9, 2009 indicated an after-tax NPV and IRR for tin concentrate, indium sponge and zinc metal production option of $54.2 million and 23.94%, respectively, and an after-tax NPV and IRR for tin concentrate and zinc-indium concentrate production option of $21.5 million and 19.3%, respectively. A modification to the tax computation structure resulted in the reported after-tax values being slightly higher than the values currently indicated in the PA. The PA indicates an after-tax NPV and IRR for the tin concentrate, indium sponge and zinc metal production option of $47.2 million and 22.55%, respectively, and an after-tax NPV and IRR for the tin concentrate and zinc-indium concentrate production option of  $18.1 million and 18.0%, respectively. The pre-tax NPVs and IRRs are, however, consistent between the press release issued by Adex on December 9, 2009 and the PA. Adex’s position is not materially affected by the changes in the after-tax results.

The PA and the economic analyses contained therein are preliminary in nature and contain "Inferred" mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the PA will be realized with more detailed work. Mineral resources that are not mineral reserves do not have demonstrated economic viability.

The PA is now available on www.sedar.com.

Qualified Persons
J. Dean Thibault, P. Eng., Senior Process Chemical Engineer and Principal of Thibault & Associates Inc., an independent qualified person as defined by NI 43-101, supervised the preparation and compilation of the PA and the technical information related to metallurgical, hydrometallurgical and economic information contained in this press release in compliance with NI 43-101.

Andrew Hara, P. Eng., Mining Engineer, an independent qualified person as defined by NI 43-101, supervised the preparation of the technical information related to mine planning and mining contained in this press release in compliance with NI 43-101.

Tim R. McKeen, P. Eng., Process Chemical Engineer, an independent qualified person as defined by NI 43-101, supervised the preparation of the technical information related to metallurgical processing contained in this press release in compliance with NI 43-101.

Stephanie M. Scott, P. Eng., Process Chemical Engineer, an independent qualified person as defined by NI 43-101, supervised the preparation of the technical information related to hydrometallurgical processing contained in this press release in compliance with NI 43-101.

Trevor Boyd, P. Geo., the Company's Geological Consultant and a qualified person as defined by NI 43-101, supervised the preparation of the geological technical information contained in this press release in compliance with NI 43-101.

ABOUT ADEX
Adex Mining Inc. is a Canadian junior mining company with an experienced management team. The Company is focused on developing its flagship Mount Pleasant Mine Property, a multi-metal project that is host to promising tungsten-molybdenum and tin-indium-zinc-copper mineralization. Located in Charlotte County, New Brunswick, the Mount Pleasant Mine Property is situated approximately 80 kilometres south of Fredericton, the provincial capital, and is 65 kilometres from the United States border. The common shares of Adex trade on the TSX Venture Exchange under the stock symbol "ADE".

FOR FURTHER INFORMATION PLEASE CONTACT:
J. Errol Farr, CMA
President, Chief Executive Officer and Director
Adex Mining Inc.
1-866-508-2339 (ADEX)
Email: investorrelations@adexmining.com
Website: www.adexmining.com 

No securities commission or regulatory authority has approved or disapproved the contents of this press release.
 
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

FORWARD-LOOKING STATEMENTS
Certain statements in this press release may constitute "forward-looking" statements which involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements of Adex, its subsidiary or the industry in which they operate to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. When used in this press release, the words "estimate", "believe", "anticipate", "intend", "expect", "plan", "may", "should", "will", the negative thereof or other variations thereon or comparable terminology are intended to identify forward-looking statements. Such statements reflect the current expectations of the management of Adex with respect to future events based on currently available information and are subject to risks and uncertainties that could cause actual results, performance or achievements to differ materially from those expressed or implied by those forward-looking statements. These risks and uncertainties are detailed from time to time, including, without limitation, under the heading "Risk Factors", in reports filed by Adex with the Alberta, British Columbia and Ontario Securities Commissions which are available at www.sedar.com and to which readers of this press release are referred for additional information concerning Adex, its prospects and the risks and uncertainties relating to Adex and its prospects. New risk factors may arise from time to time and it is not possible for management to predict all of those risk factors or the extent to which any factor or combination of factors may cause actual results, performance and achievements of Adex to be materially different from those contained in forward-looking statements. Although the forward-looking statements contained in this press release are based upon what management believes to be reasonable assumptions, Adex cannot assure investors that actual results will be consistent with these forward-looking statements. Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.
 
The forward-looking information contained in this press release is current only as of the date of the press release. Adex does not undertake or assume any obligation to release publicly any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.

Toronto – March 3, 2010 - Adex Mining Inc. (“Adex” or the “Company”) (TSX-V: ADE) continues to move forward with confirmation of the process development options outlined in its recently filed National Instrument 43-101 (“NI 43-101”) compliant preliminary assessment report (the “PA”) on the North Zone ("NZ") of its wholly-owned Mount Pleasant Mine Property (“Mount Pleasant” or the “Property”), located in southwestern New Brunswick, Canada.

Two potential NZ production options resulted from the PA: the production of tin concentrate, indium sponge and zinc metal, and the production of tin concentrate and zinc-indium concentrate.

Adex has engaged SGS Lakefield to perform bench scale performance and locked cycle testing for its tin concentrate and zinc-indium concentrate production option and has secured a spot with SGS for commencement in April of pilot plant operations.

As well, Adex has engaged Thibault & Associates Inc. of New Brunswick for pilot testing and continuing development of a comprehensive flowsheet of its hydrometallurgical process for the production of zinc metal and indium sponge metal.

Results from pilot plant test work, expected by mid-summer 2010, will, if positive, lead directly to a definitive feasibility study (“DFS”), which will initially run concurrently with the final stages of the pilot plant programs. Positive results from the DFS as well as government regulatory approvals and project financing are expected to lead to a production decision before the end of 2010. 

Pending the developments referred to above, Adex expects to be positioned to construct an access decline and begin engineering and procurement of processing equipment by early 2011. Concentrator production is targeted for late 2011.

The PA, which is available at www.sedar.com, indicated pre-tax internal rates of return (“IRR”) for the tin concentrate, indium sponge and zinc metal production option and the tin concentrate and zinc-indium concentrate production option of 28.87% and 23.49%, respectively.  The PA also indicated an after-tax IRR of 22.55% for the tin concentrate, indium sponge and zinc metal production option, and an after-tax IRR of 18% for the tin concentrate and zinc-indium concentrate production option.

The PA and the economic analyses contained therein are preliminary in nature and contain "Inferred" mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the PA will be realized with more detailed work. Mineral resources that are not mineral reserves do not have demonstrated economic viability.

The Property hosts the tungsten-molybdenum bearing Fire Tower Zone (“FTZ”) and the tin-indium-zinc bearing NZ. The FTZ is the site of a past-producing tungsten-molybdenum underground mining operation that produced and sold tungsten concentrate between 1983 and 1985.
 
Qualified Person
J. Dean Thibault, P. Eng., Senior Process Chemical Engineer and Principal of Thibault & Associates Inc., an independent qualified person as defined by NI 43-101, supervised the preparation of the technical information contained in this press release in compliance with NI 43-101.

ABOUT ADEX
Adex Mining Inc. is a Canadian junior mining company with an experienced management team. The Company is focused on developing its flagship Mount Pleasant Mine Property, a multi-metal project that is host to promising tungsten-molybdenum and tin-indium-zinc-copper mineralization. Located in Charlotte County, New Brunswick, the Mount Pleasant Mine Property is situated approximately 80 kilometres south of Fredericton, the provincial capital, and is 65 kilometres from the United States border. The common shares of Adex trade on the TSX Venture Exchange under the stock symbol "ADE".

FOR FURTHER INFORMATION PLEASE CONTACT:
J. Errol Farr, CMA
President, Chief Executive Officer and Director
Adex Mining Inc.
1-866-508-2339 (ADEX)
Email: investorrelations@adexmining.com
Website: www.adexmining.com 

No securities commission or regulatory authority has approved or disapproved the contents of this press release.
 
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

FORWARD-LOOKING STATEMENTS
Certain statements in this press release may constitute "forward-looking" statements which involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements of Adex, its subsidiary or the industry in which they operate to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. When used in this press release, the words "estimate", "believe", "anticipate", "intend", "expect", "plan", "may", "should", "will", the negative thereof or other variations thereon or comparable terminology are intended to identify forward-looking statements. Such statements reflect the current expectations of the management of Adex with respect to future events based on currently available information and are subject to risks and uncertainties that could cause actual results, performance or achievements to differ materially from those expressed or implied by those forward-looking statements. These risks and uncertainties are detailed from time to time, including, without limitation, under the heading "Risk Factors", in reports filed by Adex with the Alberta, British Columbia and Ontario Securities Commissions which are available at www.sedar.com and to which readers of this press release are referred for additional information concerning Adex, its prospects and the risks and uncertainties relating to Adex and its prospects. New risk factors may arise from time to time and it is not possible for management to predict all of those risk factors or the extent to which any factor or combination of factors may cause actual results, performance and achievements of Adex to be materially different from those contained in forward-looking statements. Although the forward-looking statements contained in this press release are based upon what management believes to be reasonable assumptions, Adex cannot assure investors that actual results will be consistent with these forward-looking statements. Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.
 
The forward-looking information contained in this press release is current only as of the date of the press release. Adex does not undertake or assume any obligation to release publicly any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.

Toronto – May 11, 2010 – Adex Mining Inc. (“Adex” or the “Company”) (TSX-V: ADE) is pleased to announce that SGS Lakefield Research Limited (“SGS”) of Lakefield, Ontario has been engaged to test the hydrometallurgical treatment of molybdenum concentrate from the Fire Tower Zone (“FTZ”) at Adex’ wholly-owned Mount Pleasant Mine Property (“Mount Pleasant” or the “Property”), located in southwestern New Brunswick, Canada.

Adex has engaged SGS to perform a scoping level investigation of a hydrometallurgical flowsheet that is designed to allow Adex to produce high grade ammonium molybdate at its Mount Pleasant operations. The process involves pressure oxidation of the molybdenite to convert the sulphide concentrate to an oxide, followed by an atmospheric ammonia leach of the molybdenum trioxide product. Ammonium dimolybdate crystals are then recovered from the ammonia leach liquor by evaporation and crystallization.

Results from test work, expected in about six weeks, will, if positive, lead to an upgrade to the conceptual framework related to the production of tungsten and molybdenum products as described in the 2008 FTZ Scoping Study completed by Aker Metals, a division of Aker Solutions Canada Inc., which indicated a pre-tax internal rate of return (“IRR”) of 27% for the production of ammonium paratungstate (“APT”)  and molybdenum sulphide concentrate, based on projected product prices for APT of $US215 per metric tonne unit and for molybdic oxide (MoO3) of US$23.17 per pound.  An executive summary of the 2008 Scoping Study is contained in the National Instrument 43-101 (“NI 43-101”) compliant technical report (the “Technical Report”) on the Fire Tower Zone (“FTZ”) entitled “A Technical Review of the Mount Pleasant Property, Including an updated Mineral Resource Estimate on the Fire Tower Zone, Southwestern New Brunswick for Adex Mining Inc.” dated December 1, 2008 and completed by Paul Dunbar, M.Sc., P.Geo. Senior Associate Geologist of Watts, Griffis and McOuat Limited, Dorota A. El-Rassi, M.Sc., P.Eng., Geological Engineer of SRK Consulting and John S. Rogers, P.Eng., of Aker Metals, a division of Aker Solutions Canada Inc., which is available on www.sedar.com.

Errol Farr, the President and CEO of Adex, stated, “This investigation, while preliminary in nature, is another step toward evaluating the re-commencement of mining the FTZ. With metal prices, especially for molybdenum, showing recovery in 2010, the FTZ is demanding new attention by Adex management.” It is the goal of Adex to produce value added products with each of the mineral concentrates which may ultimately be processed at Mount Pleasant.

The 2008 FTZ Scoping Study and the economic analyses contained therein are preliminary in nature and contain "Inferred" mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the results of the 2008 FTZ Scoping Study will be realized with more detailed work. Mineral resources that are not mineral reserves do not have demonstrated economic viability.

Adex is currently engaged in bench and pilot metallurgical test programs for the production of tin concentrate and value added zinc and indium metal products from its Mount Pleasant North Zone (“NZ”) resource, as discussed in a press release dated March 3, 2010.  Adex intends to make a production decision on the NZ in 2010 pending completion of a definitive feasibility study scheduled for forth quarter of this year.

The Property hosts two important and separate mineral resources, being the tungsten-molybdenum bearing FTZ and the tin-indium-zinc bearing NZ. The FTZ is the site of a past-producing tungsten-molybdenum underground mining operation that produced and sold tungsten concentrate between 1983 and 1985.
 
Qualified Person
Trevor Boyd, P.Geo., the Company’s Geological Consultant and a qualified person as defined by NI 43-101 supervised the preparation of the technical information contained in this press release in compliance with NI 43-101. 
 
ABOUT ADEX
Adex Mining Inc. is a Canadian junior mining company with an experienced management team. The Company is focused on developing its flagship Mount Pleasant Mine Property, a multi-metal project that is host to promising tungsten-molybdenum and tin-indium-zinc-copper mineralization. Located in Charlotte County, New Brunswick, the Mount Pleasant Mine Property is situated approximately 80 kilometres south of Fredericton, the provincial capital, and is 65 kilometres from the United States border. The common shares of Adex trade on the TSX Venture Exchange under the stock symbol "ADE".

FOR FURTHER INFORMATION PLEASE CONTACT:
J. Errol Farr, CMA
President, Chief Executive Officer and Director
Adex Mining Inc.
1-866-508-2339 (ADEX)
Email: investorrelations@adexmining.com
Website: www.adexmining.com 

No securities commission or regulatory authority has approved or disapproved the contents of this press release.
 
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

FORWARD-LOOKING STATEMENTS
Certain statements in this press release may constitute "forward-looking" statements which involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements of Adex, its subsidiary or the industry in which they operate to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. When used in this press release, the words "estimate", "believe", "anticipate", "intend", "expect", "plan", "may", "should", "will", the negative thereof or other variations thereon or comparable terminology are intended to identify forward-looking statements. Such statements reflect the current expectations of the management of Adex with respect to future events based on currently available information and are subject to risks and uncertainties that could cause actual results, performance or achievements to differ materially from those expressed or implied by those forward-looking statements. These risks and uncertainties are detailed from time to time, including, without limitation, under the heading "Risk Factors", in reports filed by Adex with the Alberta, British Columbia and Ontario Securities Commissions which are available at www.sedar.com and to which readers of this press release are referred for additional information concerning Adex, its prospects and the risks and uncertainties relating to Adex and its prospects. New risk factors may arise from time to time and it is not possible for management to predict all of those risk factors or the extent to which any factor or combination of factors may cause actual results, performance and achievements of Adex to be materially different from those contained in forward-looking statements. Although the forward-looking statements contained in this press release are based upon what management believes to be reasonable assumptions, Adex cannot assure investors that actual results will be consistent with these forward-looking statements. Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.
 
The forward-looking information contained in this press release is current only as of the date of the press release. Adex does not undertake or assume any obligation to release publicly any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.

Toronto – June 2, 2010 –  Adex Mining Inc. (“Adex” or the “Company”) (TSX-V: ADE) is pleased to provide an update on its tin, indium and zinc bench scale test project being carried out by SGS Lakefield Research Limited (“SGS”) of Lakefield, Ontario to evaluate the production of tin concentrate and zinc-indium concentrate from the North Zone (“NZ”) at Adex’s wholly-owned Mount Pleasant Mine Property (“Mount Pleasant” or the “Property”), located in southwestern New Brunswick, Canada.

The bench scale program is a two-pronged approach. The first step is designed to produce indium-bearing zinc concentrate for further upgrading to a 95% indium sponge utilizing an exclusive hydrometallurgical process being developed for Adex by Thibault & Associates in Fredericton, New Brunswick.  The second step is designed to test the production of a tin concentrate for direct sale to a tin smelter. Management and directors of Adex were present at SGS to observe the final stage of the bench scale program - locked cycle testwork on both products - on May 28, 2010. Test results will be released as soon as they are available.

The bench scale program will now lead directly to a pilot plant program which will be carried out at SGS. A 100 tonne sample from the North Zone has already been received at SGS in Lakefield and the pilot plant will be set up over the next two weeks with pilot plant operations scheduled to begin by mid-June.

Errol Farr, President and CEO of Adex, stated: “We are very pleased with both the metallurgical and hydrometallurgical progress of our NZ testwork to date,. We look forward to assessing the final results of the bench scale metallurgical program, and anxiously await pilot plant results which will be used for scale up to commercial production.”

Adex’s Mount Pleasant Property hosts two important and separate mineral resources: the tungsten-molybdenum bearing Fire Tower Zone (the “FTZ”) and the tin-indium-zinc bearing NZ. The FTZ is the site of a past-producing tungsten-molybdenum underground mining operation that produced and sold tungsten concentrate between 1983 and 1985.

ABOUT ADEX
Adex Mining Inc. is a Canadian junior mining company with an experienced management team. The Company is focused on developing its flagship Mount Pleasant Mine Property, a multi-metal project that is host to promising tungsten-molybdenum and tin-indium-zinc-copper mineralization. Located in Charlotte County, New Brunswick, the Mount Pleasant Mine Property is situated approximately 80 kilometres south of Fredericton, the provincial capital, and is 65 kilometres from the United States border. The common shares of Adex trade on the TSX Venture Exchange under the stock symbol "ADE".

FOR FURTHER INFORMATION PLEASE CONTACT:
J. Errol Farr, CMA
President, Chief Executive Officer and Director
Adex Mining Inc.
1-866-508-2339 (ADEX)
Email: investorrelations@adexmining.com
Website: www.adexmining.com 

No securities commission or regulatory authority has approved or disapproved the contents of this press release.
 
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

FORWARD-LOOKING STATEMENTS
Certain statements in this press release may constitute "forward-looking" statements which involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements of Adex, its subsidiary or the industry in which they operate to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. When used in this press release, the words "estimate", "believe", "anticipate", "intend", "expect", "plan", "may", "should", "will", the negative thereof or other variations thereon or comparable terminology are intended to identify forward-looking statements. Such statements reflect the current expectations of the management of Adex with respect to future events based on currently available information and are subject to risks and uncertainties that could cause actual results, performance or achievements to differ materially from those expressed or implied by those forward-looking statements. These risks and uncertainties are detailed from time to time, including, without limitation, under the heading "Risk Factors", in reports filed by Adex with the Alberta, British Columbia and Ontario Securities Commissions which are available at www.sedar.com and to which readers of this press release are referred for additional information concerning Adex, its prospects and the risks and uncertainties relating to Adex and its prospects. New risk factors may arise from time to time and it is not possible for management to predict all of those risk factors or the extent to which any factor or combination of factors may cause actual results, performance and achievements of Adex to be materially different from those contained in forward-looking statements. Although the forward-looking statements contained in this press release are based upon what management believes to be reasonable assumptions, Adex cannot assure investors that actual results will be consistent with these forward-looking statements. Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.
 
The forward-looking information contained in this press release is current only as of the date of the press release. Adex does not undertake or assume any obligation to release publicly any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.

Toronto – June 23, 2010 – Adex Mining Inc. (“Adex” or the “Company”) (TSX-V: ADE) is pleased to announce that Michael M. Boyd has been appointed a director of the Company, subject to regulatory approval. Mr. Boyd has also been appointed as Chairman of the Company’s Nomination and Corporate Governance Committee.
 
Mr. Boyd is an entrepreneurial business leader and senior finance executive with extensive experience in bridge debt financing, venture capital, private equity, lending and corporate finance. He has expertise in business start-ups and raising capital through his roles as a senior executive in several Toronto brokerage firms between 1992 and 1995, as Managing Director, Merchant Banking, for HSBC Capital (Canada) Inc. from 1997 to 2002, and in running his own company, Junior Industrial Finance Corp. from 1990 to the present date. Mr. Boyd also managed a bridge fund specializing in enterprise value lending of short to medium term loans from 2002 until its recent wind-up.

Errol Farr, President of the Company stated “Mr. Boyd’s extensive experience in the capital and business markets will be a valuable addition to the Board of the Directors as the Company moves forward with the development of its Mount Pleasant Property.” 

The Company also wishes to announce that Kabir Ahmed has resigned as a director of the Company effective immediately. Kabir has served as a director of Adex since January of 2007 and also served as President and CEO from August 2006 until his resignation as such in May 2009. Mr. Ahmed was responsible for the Company’s listing on the TSX-V and the successful completion of two equity financings in 2007, as well as the completion of numerous development activities during his tenure as President and CEO. Kabir will continue in a consulting relationship with the Company.

Errol Farr, President of the Company stated “I would like to thank Kabir for his years of service and contributions to Adex. It has been a very positive experience working with him and I wish Kabir the best in the future.” 

The Company wishes to announce that it has granted options to acquire 200,000 common shares of the Company an exercise price of $0.12 per share to Mr. Boyd pursuant to the Company’s stock option plan. These options, which will vest quarterly over a period of twelve months, expire on June 22, 2015.

ABOUT ADEX
Adex Mining Inc. is a Canadian junior mining company with an experienced management team. The Company is focused on developing its flagship Mount Pleasant Mine Property, a multi-metal project that is host to promising tungsten-molybdenum and tin-indium-zinc-copper mineralization. Located in Charlotte County, New Brunswick, the Mount Pleasant Mine Property is situated approximately 80 kilometres south of Fredericton, the provincial capital, and is 65 kilometres from the United States border. The common shares of Adex trade on the TSX Venture Exchange under the stock symbol "ADE".

FOR FURTHER INFORMATION PLEASE CONTACT:
J. Errol Farr, CMA
President, Chief Executive Officer and Director
Adex Mining Inc.
1-866-508-2339 (ADEX)
Email: investorrelations@adexmining.com
Website: www.adexmining.com 

No securities commission or regulatory authority has approved or disapproved the contents of this press release.
 
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

FORWARD-LOOKING STATEMENTS
Certain statements in this press release may constitute "forward-looking" statements which involve known and unknown risks, uncertainties and other factors which may cause actual results, performance or achievements of Adex, its subsidiary or the industry in which they operate to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. When used in this press release, the words "estimate", "believe", "anticipate", "intend", "expect", "plan", "may", "should", "will", the negative thereof or other variations thereon or comparable terminology are intended to identify forward-looking statements. Such statements reflect the current expectations of the management of Adex with respect to future events based on currently available information and are subject to risks and uncertainties that could cause actual results, performance or achievements to differ materially from those expressed or implied by those forward-looking statements. These risks and uncertainties are detailed from time to time, including, without limitation, under the heading "Risk Factors", in reports filed by Adex with the Alberta, British Columbia and Ontario Securities Commissions which are available at www.sedar.com and to which readers of this press release are referred for additional information concerning Adex, its prospects and the risks and uncertainties relating to Adex and its prospects. New risk factors may arise from time to time and it is not possible for management to predict all of those risk factors or the extent to which any factor or combination of factors may cause actual results, performance and achievements of Adex to be materially different from those contained in forward-looking statements. Although the forward-looking statements contained in this press release are based upon what management believes to be reasonable assumptions, Adex cannot assure investors that actual results will be consistent with these forward-looking statements. Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.
 
The forward-looking information contained in this press release is current only as of the date of the press release. Adex does not undertake or assume any obligation to release publicly any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.